Hydraulic Press Brake Attachment 12 Inch Metal Bending Tool For 12 To 20 Ton Heavy Duty Shop Ready Dual Spring Design 0 To 90 Degree Adjustable Bends Up To Three Sixteenth Inch On Steel Iron Aluminum Sheets Red
✔️ Single-unit, 12 in bend length, 3/16 in thick, for 12 to 20 ton presses
The press brake attachment clamps onto standard hydraulic presses to form accurate bends in metal sheets. It’s a handy tool in metal fabrication shops, prototype labs, and DIY workshops for creating brackets, rails, and supports.
✅ Material: 45# steel with protective finish
✅ Bending angle: up to 90°
✅ Bend length: 12 inches
✅ Bend thickness: 3/16 inches
✅ Dual springs buffer pressure for accuracy
✅ Base size: 14.5 in x 7.5 in x 9.25 in
✅ Fits 12 to 20 ton hydraulic presses (press not included)
✅ Pack: 1 piece
💡 What is a press brake attachment used for?
In metal fabrication, this handy device lets you form precise bends on flat sheets using a hydraulic press. It provides a stable base and repeatable results for common workshop tasks.
- Handy for shaping brackets, ribs, and chassis parts- Works with standard 12 to 20 ton presses when mounted (press not included)
- Produces bends up to 90 degrees on sheets up to 3/16 inch thick
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Hydraulic Press Brake Attachment 12 Inch Metal Bending Tool For 12 To 20 Ton Heavy Duty Shop Ready Dual Spring Design 0 To 90 Degree Adjustable Bends Up To Three Sixteenth Inch On Steel Iron Aluminum Sheets Red
Hydraulic Press Brake Attachment 12 Inch Metal Bending Tool For 12 To 20 Ton Heavy Duty Shop Ready Dual Spring Design 0 To 90 Degree Adjustable Bends Up To Three Sixteenth Inch On Steel Iron Aluminum Sheets Red
✔️ Single-unit, 12 in bend length, 3/16 in thick, for 12 to 20 ton presses
The press brake attachment clamps onto standard hydraulic presses to form accurate bends in metal sheets. It’s a handy tool in metal fabrication shops, prototype labs, and DIY workshops for creating brackets, rails, and supports.
✅ Material: 45# steel with protective finish
✅ Bending angle: up to 90°
✅ Bend length: 12 inches
✅ Bend thickness: 3/16 inches
✅ Dual springs buffer pressure for accuracy
✅ Base size: 14.5 in x 7.5 in x 9.25 in
✅ Fits 12 to 20 ton hydraulic presses (press not included)
✅ Pack: 1 piece
💡 What is a press brake attachment used for?
In metal fabrication, this handy device lets you form precise bends on flat sheets using a hydraulic press. It provides a stable base and repeatable results for common workshop tasks.
- Handy for shaping brackets, ribs, and chassis parts- Works with standard 12 to 20 ton presses when mounted (press not included)
- Produces bends up to 90 degrees on sheets up to 3/16 inch thick
Original: $171.08
-65%$171.08
$59.88Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
✔️ Single-unit, 12 in bend length, 3/16 in thick, for 12 to 20 ton presses
The press brake attachment clamps onto standard hydraulic presses to form accurate bends in metal sheets. It’s a handy tool in metal fabrication shops, prototype labs, and DIY workshops for creating brackets, rails, and supports.
✅ Material: 45# steel with protective finish
✅ Bending angle: up to 90°
✅ Bend length: 12 inches
✅ Bend thickness: 3/16 inches
✅ Dual springs buffer pressure for accuracy
✅ Base size: 14.5 in x 7.5 in x 9.25 in
✅ Fits 12 to 20 ton hydraulic presses (press not included)
✅ Pack: 1 piece
💡 What is a press brake attachment used for?
In metal fabrication, this handy device lets you form precise bends on flat sheets using a hydraulic press. It provides a stable base and repeatable results for common workshop tasks.
- Handy for shaping brackets, ribs, and chassis parts- Works with standard 12 to 20 ton presses when mounted (press not included)
- Produces bends up to 90 degrees on sheets up to 3/16 inch thick
