1/16 Inch Diameter Spiral Downcut Router Bit With 1/4 Inch Shank, Pro Grade Solid Carbide End Mills For CNC Wood Inlay And Grooving, Fast Chip Evacuation, 2 Inch Overall Length, 1/2 Inch Cutting Length
✔️ 1/16 in (1.59mm) dia, 1/4 in shank, 2 in OAL, 1/2 in cut
Solid carbide down-cut router bit designed for CNC wood inlay and grooving. It excels in mortising, engraving, and carving across softwood, hardwood, MDF, plywood, and laminates.
✅ Premium carbide edge stays sharp after repeated use, delivering fast, precise cuts.✅ 140-degree included angle aids rapid chip evacuation and resists upward thrust.
✅ Down-cut spiral directs chips downward to prevent tear-out and surface damage.
✅ Ra below 0.8 μm delivers clean, burr-free finishes on wood and laminates.
✅ Packed in durable plastic case with compression holder and rubber cap for protection.
💡 What is a downcut router bit used for in woodworking inlay and grooving?
A handy guide for clean edges and precise grooves on wood. - Downcut bits pull chips downward to reduce tear-out on laminates and veneers - Handy for inlays, mortises, and decorative grooves on wood - Solid carbide construction gives long life and consistent cuts - Works well with CNC machines for repeatable resultsProduct Information
Product Information
Shipping & Returns
Shipping & Returns
1/16 Inch Diameter Spiral Downcut Router Bit With 1/4 Inch Shank, Pro Grade Solid Carbide End Mills For CNC Wood Inlay And Grooving, Fast Chip Evacuation, 2 Inch Overall Length, 1/2 Inch Cutting Length
1/16 Inch Diameter Spiral Downcut Router Bit With 1/4 Inch Shank, Pro Grade Solid Carbide End Mills For CNC Wood Inlay And Grooving, Fast Chip Evacuation, 2 Inch Overall Length, 1/2 Inch Cutting Length
✔️ 1/16 in (1.59mm) dia, 1/4 in shank, 2 in OAL, 1/2 in cut
Solid carbide down-cut router bit designed for CNC wood inlay and grooving. It excels in mortising, engraving, and carving across softwood, hardwood, MDF, plywood, and laminates.
✅ Premium carbide edge stays sharp after repeated use, delivering fast, precise cuts.✅ 140-degree included angle aids rapid chip evacuation and resists upward thrust.
✅ Down-cut spiral directs chips downward to prevent tear-out and surface damage.
✅ Ra below 0.8 μm delivers clean, burr-free finishes on wood and laminates.
✅ Packed in durable plastic case with compression holder and rubber cap for protection.
💡 What is a downcut router bit used for in woodworking inlay and grooving?
A handy guide for clean edges and precise grooves on wood. - Downcut bits pull chips downward to reduce tear-out on laminates and veneers - Handy for inlays, mortises, and decorative grooves on wood - Solid carbide construction gives long life and consistent cuts - Works well with CNC machines for repeatable resultsOriginal: $39.59
-65%$39.59
$13.86Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
✔️ 1/16 in (1.59mm) dia, 1/4 in shank, 2 in OAL, 1/2 in cut
Solid carbide down-cut router bit designed for CNC wood inlay and grooving. It excels in mortising, engraving, and carving across softwood, hardwood, MDF, plywood, and laminates.
✅ Premium carbide edge stays sharp after repeated use, delivering fast, precise cuts.✅ 140-degree included angle aids rapid chip evacuation and resists upward thrust.
✅ Down-cut spiral directs chips downward to prevent tear-out and surface damage.
✅ Ra below 0.8 μm delivers clean, burr-free finishes on wood and laminates.
✅ Packed in durable plastic case with compression holder and rubber cap for protection.
💡 What is a downcut router bit used for in woodworking inlay and grooving?
A handy guide for clean edges and precise grooves on wood. - Downcut bits pull chips downward to reduce tear-out on laminates and veneers - Handy for inlays, mortises, and decorative grooves on wood - Solid carbide construction gives long life and consistent cuts - Works well with CNC machines for repeatable results
